Rc Steel Tank Turret and Cannon Homemade EP.4

canon mechanism rc tank

In this video I attached a two-disc sprocket that are driven by 2 bearings and connected by sprockets from the angle grinder and connected to a windshield wiper motor. The cannon is designed to have both strength and finesse in sight, so a multiple reducer is applied by gears. For this Rc tank canon mechanism i used this parts:-2 * discs made on the lathe-1 * cogwheel-1…

See More

Heavy Rc Tank Homemade cannon Update EP.3

steel huge rc tank

In this episode we added several slightly mixed details, including the support of the cannon mechanism, the contacts related to the turret and some updates related to the appearance. In connection with the cannon system we used a motor from the windshield wipers, sprockets from the angle grinder, 8 mm shaft, 8 mm bearings, sprocket that moves the cannon up and down, electric limiters together with two…

See More

Building canon mechanism with big servo motor windshield EP 2

windshield motor servo

One of the options chosen to move the cannon is by using the h bridge bts970 together with a servomotor and a windscreen wiper motor. It is quite simple on the electrical side, you will see in the video below how the parts change and you synchronize both motors to work like a bigger servomotor that can lift about 50 kg. The most important part to do…

See More

What Electronic Speed Controller to use ?

7.2-16v esc for tank rc

Below I will write about some essential components for your tank project whether it is a tank or a rover or other project that runs on brushed motors. Electronic Speed Controllers ESC These electronic parts control the motors back and forth via the remote control. They have a variable speed from a few revolutions per minute to several thousand revolutions depending on the voltage and the power…

See More